maquina electrostatica

maquina electrostatica
CategoriesPowder Coating Gun
BrandCOLO powder coating equipment
ModelCOLO-800D
ConditionNew
TypeCoating Spray Gun
Substrateall metallic surface
CoatingPowder Coating
Voltage110V/220V
Power(W)50W
Dimension(L*W*H)118CM*80CM*80CM
Weight40KGS
CertificationCE
Warranty1 YEAR
After-sales Service ProvidedEngineers available to service machinery overseas
machineelectrostatic powder coating
kindone-touch intelligent
styleelectrostatic Powder coating machine
Unit PriceUS $ 0-1,000 / piece
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

  with powder coating gun,powder coating unit.

 

 

maquina electrostatica

Brief Introduction

 

The process of the powder coating is like this: The powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns. The guns spray a powder/air mixture onto the workpieces

 

maquina electrostatica

 

 

Specification

 

0-100 Digital Adjustable KV 
Fully Adjustable Amperage 
With three setting program,for flat shape workpiece,complicated shape workpiece,recoating,easy for operation.
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
 
Comes with Full Array of Nozzle Assortment. 
Field Tested and Proven to operate in the toughest environments. 
Comes with different array of delivery systems:
Hope Feed - 55L
 Because this system is specially balanced for the maximum spray capability with
 
the Smoothest Finish Possible. 

 

maquina electrostatica

 

 

 

 

Techincal data: 

Electrical data 
Mains input voltage100-240 VAC
Operating frequency50-60 Hz
Input power50W
Nominal output voltage (to the gun)max. 12 V
Nominal output current (to the gun)max. 1 A
 IP54
Ambient temperature range0°C - +40°C (+32°F - +104°F)
Max. operating temperature85°C (+185°F)
ApprovalsCE
  
Pneumatical data 
Compressed air connection1/4" male quick release
Max. input pressure10 bar / 145 psi
Min. input pressure (while unit in operation)6 bar / 87 psi
Max. water vapor content of the compressedair 1.3 g/m³
Max. oil vapor content of the compressed air0.1 mg/m³
  
Packing Dimensions 
Length120CM
Width79CM
Height73CM
Weightapprox. 55kgs

 

 

 at same time with two different  models 

COLO-800T- C (cup gun )

maquina electrostatica

 

colo-800D -H( mini hopper model )maquina electrostatica

 

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermosetpolymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.

 

The powder coating process involves three basic steps:

  1. Part preparation or the pre-treatment
  2. The powder application
  3. Curing

 

COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including automated equipment, spray booths and spare parts for itw gema , wagner , nodrson , kci famous brand in china.

 

FACTORY

maquina electrostatica 

 Any questions,please contact us

 

maquina electrostatica

 

 

 

 

powder coating gun, powder coating machine, powder coating system,powder coating equipment,powder coating control unit

 

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Contact Person
QR-CODE
from theInquiry
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.