- Powder Coating Gun
- Powder Coating Booth
- Powder Coating Oven
- automatic powder coating gun and equipment
- Reciprocator for pwoder coating gun
- powder coating line
- Powder feed center
- Powder Hopper
- Tribo powder spray gun
- Electrostatic Liquid Spray Guns
- Sandblasting Machine
- Parker Ionics Replacement Part
- powder coating testing meter
- Powder Coating Line Spare Part
- Powder Coatings
- NEW products
- Powder Coating Gun Machine on Sale
- KCI powder coating gun spare part
- PG1 / PG2A / GM02 / GA02 / GM03 / GA03 Powder coating gun spare part
- PEM C4 / X1 Powder Spray gun parts
- Encore / Prodigy / Vantage / Sure Coat / Versa-Spray / 100 Plus Feed Pumps spray gun parts
- Sames / Eurotec Powder coating gun parts
- COLO powder coating gun parts
- bo'x feed
Automatic vibrating powder feed center for fast color change
|Categories||Powder feed center|
|Album||View larger image|
|Brand||COLO powder coating equipment|
|Extra Services:||Painting / Powder Coating|
|Material / Metal:||Aluminum|
|Unit Price||US $ 800-3000 / piece|
|FOB port||shanghai or ningbo port|
|Terms of Payment||T/T, Western Union, MoneyGram|
Automatic vibrating powder feed center for fast color change- a good helper for powder operator
1. Powder’s smoother fluidization
2. Maintain good working environment
3. Make the gun powder supply more uniform
4. Discharge operators from the problems of powder gun powder supplying.
5. Greatly reduce the labor intensity and powder influence on operators’ healthy during cleanup process.
6. Easier to change color
Automatic vibrating powder feed center parameters
1. Power supply voltage: 1P 220VAC (110V)
2. Power: 500W
3. Gas pressure: 0.6-0.8MP
4. Equipped with up to 16 powder pumps at most.
How to operate the powder feed center
When you turn on the power, power supply indicator on human-computer interface is on. The system starts self-test, after a few seconds it enters the start page. Touch "work mode" button on the screen, the system enters the work mode as below.
2. Work mode
Start or stop all components. Touch the corresponding keys to the various components. They can be started / or stopped.
3. Start or stop pump platform level
Press more than 3 seconds to make sure no wrong operation.
How does the powder feed center work?
Put the powder hopper full with powder in the powder supply room, and on the powder hopper vibration platform, and then access the air for the fluidization of powder. Vibration platform will vibrate at intervals. Powder particles generated in the process of fluidization goes through the rear ventilation pipe so that powder doesn’t spill. In the process of powder gun working, the powder pump station will be decreased, so that the suction tube is inserted into fluidizing powder.
Control the pump station decreasing by powder detecting sensor, so that the powder suction tube keep been inserted into the sufficient fluidization powders. With powder level declining, when the powder level reaches the lower limit, the powder center of the electronic control system will issue audible alarm and on the touch screen with character note. Remind the operator low powder level alarm, and he or she needs to add powder. In the cleaning process, lower the pump platform down to the powder cleaning level. Open and clear the powder. Powder center automatically blowbacks the powder gun hoses of both sides alternately.
If change the color, rise the pump station to higher point for the powder hopper can be easily removed, and then carried the powder hopper with required color in.
Application of powder feed center
Work with powder coating machine, spray booth, and automatic reciprocator for high efficient powder coating.
We have ability of producing electrostatic powder coating line, paint coating line which have automatic, semi-automatic, manual and special type and curing and drying ovens with many kinds heat way (oil, gas or electric), cartridge or cyclone recovery system, wet curtain or dry painting booth, conveyor systems, spray or immersion type pretreatment plant. Also we supply the spare parts such as filters, guns, reciprocators, pumps and so on.
Colo is the leading powder coating equipment manufacturer in China, which provides high quality equipments to more than 90 countries all oven the world with advanced manufacturing machines and professional technicians. Colo offers a wide range of power coating equipments, namely powder coating machine, power coating gun, spray booth, curing oven, automatic powder coating applicator, powder coating line and replacement of spare parts for the famous brand in the world.