polypropylene Powder Coating Booths & Equipment

polypropylene Powder Coating Booths & Equipment
polypropylene Powder Coating Booths & Equipmentpolypropylene Powder Coating Booths & Equipment
CategoriesPowder Coating Booth
BrandCOLO powder coating equipment
ModelCOLO-SC02
ConditionNew
TypePowder Coating Booths & Equipment
SubstrateIron
CoatingPowder Coating
VoltageAs required
Power(W)As required
Dimension(L*W*H)As required
WeightAs required
CertificationCE
Warranty1 year
FOB portShanghai/ningbo
Terms of PaymentL/C, T/T, Western Union
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

 polypropylene Powder Coating Booths & Equipment

The  polypropylene spray chamber with the multi-cyclonerecovery gives almost 100 % powder utilization. It is maintenance free and have very long life. The powder spray booth is easy to clean, resulting in a quick color change and is safe to operate. No powder spillage out of the booth and maximum recovery through the multi-cyclone results in pollution control.

 

why choose our  polypropylene Multi-cyclone+ after filters recovery system powder spray booth?


  

The polypropylene canopy has a translucency that improves visibility inside

the booth and enhances gun transfer efficiency. It has a

long wearing, smooth, slick surface that is easy to clean

and does not attract powder or static buildup. This is the

most expensive booth material available.

  

the multi-cyclone is an improved technology based on mono-cyclone. The small height of clones allow for easymobility and faster cleaning operation

 

Improved Transfer efficiency.

Pollution free operation.

safe to operate

Maximum recovery efficiency.

Durability.

Quick colour change.

 
The polypropylene chamber with the multi-cyclone recovery consists coating chamber, multicyclone,filters with blower,motor & bin.

1,chamber:

It has a long wearing, smooth, slick surface that is easy to clean and does not attract powder or static build up.Chamber bottom is slopping in shape. So powder collection is easy. To suck the powder, at the bottom there is  a loose 'C' channel which sticks to the side wall when blower is on.

2,Multicyclone:
This consists of the cluster of very small cyclones which are less in diameters& height. The Powder sucked from the chamber gets distributed in to eachsmall cyclone. Due to small diameter & very high air velocity, maximumpowder moves along the periphery of cyclone. As each small cyclone handlessmall amount of powder, the efficiency of complete multicyclone is as high as98.5%. Due to such high efficiency maximum powder is saved & so cost of thebooth is recovered within very less time.



2,filters with blower,motor

For Powder recovery aconical bin is designed to be attached below multicyclone. To remove the binwith powder, a separate trolley is given below the bin.


DuctlessConstruction:

In between multicyclone& chamber there is no separate duct piece with bends. There is no nutbolting construction which is very very tedious for colour change & takeslot of time. As a duct there is just a loose 'C' channel. So this booth is veryeasy for cleaning. Saving time and labor.



technical data of spray booth

Outside size4000 x W 1200 x H 3000mm
Workpiece openingW700x H1800mm
Touch up openingW700 X H1500mm
Auto gun openingW 100 x H 1750 mm
Exhaust8,000 M3/Hr(150mm/Aq)
Fan typeAnti-explode Fan
Booth Carbin materialSUS304
Fluorescent lamp40W
Cartridges filter10pcs
Booth the average wind speed0.5M/Sec.(150mm/Aq)
Voltage

380V

For different models:

 

Different Models:
Depending upon size of the article, coating requirements, material handlingrequirements we have designed some standard models. As a special requirementdifferent customized models are also developed.


 

Velocity of booth should be:

Appropriate enough so that maximum powder should be attracted on the article.

If suction velocity is more, more amount of powder will be sucked towards cyclone & less on article.

If suction velocity is less, then powder will come out from cutout & surroundings will be polluted.

 
   

Spray booth Selection Criteria:

Easiness in colour change , No. of colour change ,Frequency of colour change.

Selection of Booth design.

Size of Article ,Weight of Article.

Selection & type of Track / Trolleys from 1 side or 2 sides.

System of track / trolleys.

Any other type of material handling.

 


application

electrostatic powder coating booth

factory

electrostatic powder coating boothpacking and deliver

electrostatic powder coating boothShow

electrostatic powder coating booth

welcome to contact for talking about the details by the way as follow:

electrostatic powder coating booth

COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including manual powder coating equipment, automatic equipment, spray booths,ovens and spare parts for itw gema, wagner, nodrson, kci famous brand in China.

China Powder coating gun, China powder coating machine, China powder coating system, China powder coating equipment, powder coating control unit,manual powder coating machine,manual powder coating equipment, manual powder coating gun, electrostatic powder coating equipment

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Contact Person
QR-CODE
from theInquiry
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.