manual painting machine

manual painting machine
CategoriesPowder Coating Gun
BrandCOLO powder coating equipment
ModelCOLO-151S-B
Typepowder coating spray gun
ApplicationPaint Spray Gun
Cup Volume50L
electrostatic painting equipmentpowder coating equipment
typeelectrostatic powder spray gun
MOQ1 Piece
Guarantee1 year
Unit PriceUS $ 1,000-2,999 / set
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information

powder coating spray gun

Typical characteristics

manual box unit is good for quick and easy color changes,It is designed to use the powder manufacturer’s original carton. An inclined vibration table allows complete emptying of the powder box via the fluidized suction tube.

 

 

0-100 Digital Adjustable KV
Fully Adjustable Amperage

Interchangeable with the Gema original equipment
Fully Adjustable Air for Pump on Pressure, Dosage and Nozzle Rinsing Air.
Comes with Full Array of Nozzle Assortment.
Field Tested and Proven to operate in the toughest environments.
Comes with different array of delivery systems:
 
Because this system is specially balanced for the maximum spray capability with
the Smoothest Finish Possible.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Configuration:

 

2pcs optistar control unit power supply cable

 

- 2pcs air filter

 

- A air pressure regulator

 

- 2pcs suction tube

 

- 2pcs plug-in injector

 

 

- 2pcs optiselect manual powder gun with gun cable, powder

 

hose, rinsing air hose and standard nozzle set.

 

- Pneumatic hoses for conveying air (red), supplementary

 

air (black) and fluidizing air (black)

 

powder hose

 

Ground wire

 

 

Structure:

manual painting machine

 

 

 

 

 

 

 

 

 

 

1 control unit

2 manual powder gun

3 injector

4 Frame with hand rail

5 Fluidizing/suction unit

6 Vibrating base

7 Swivel wheel

8 Swivel arm with guide sleeve

9 Filter unit

10 Hose holder

11 Gun holder

12 Rubber wheel

 

 

manual painting machine  

 

 

 

Electrical data 
Mains input voltage 100-240 VAC
Operating frequency 50-60 Hz
Input power50W
Nominal output voltage (to the gun) max. 12 V
Nominal output current (to the gun) max. 1 A
 IP54
Ambient temperature range 0°C - +40°C (+32°F - +104°F)
Max. operating temperature 85°C (+185°F)
Approvals CE
  
Pneumatical data 
Compressed air connection1/4" male quick release
Max. input pressure 10 bar / 145 psi
Min. input pressure (while unit in operation) 6 bar / 87 psi
Max. water vapor content of the compressedair 1.3 g/m³
Max. oil vapor content of the compressed air 0.1 mg/m³
  
Packing Dimensions 
Length120CM
Width 79CM
Height 73CM
Weight approx. 55kgs
  
Connection Description 
1.1 Air InCompressed air connection (6-10 bar / 87-145 PSI)
2.1 Power Mains cable connection (100-240 VAC)
2.2 Gun Gun cable connection
1.4
Electrode rinsing air connection
1.3Pict
Supplementary air connection
1.2Pict
Conveying air connection
Grounding connectionPict

 

 

 

 

Dimensions

 

Carton size: 120x79x73cm G. W: 55kg.

 

 

Connection

manual painting machine

 

The process of the coating is like this :the powder is fluidized in the powder hopper. The injectors transport the powder through the hoses to the guns . The guns spray a powder/air mixture onto the workpieces.

 

 

 

Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermosetpolymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as "whiteware," aluminium extrusions, and automobile and bicycle parts. Newer technologies allow other materials, such as MDF (medium-density fibreboard), to be powder coated using different methods.

 

 

 

The powder coating process involves three basic steps:

 

  1. Part preparation or the pre-treatment
  2. The powder application
  3. Curing

 

 

 

COLO Powder Coating Systems is a top supplier of powder coating systems and powder coating equipment including automated equipment, spray booths and spare parts for famous brand in china.

 

manual painting machinemanual painting machinemanual painting machinemanual painting machine

 

 

 

 

powder coating gun, powder coating machine, powder coating system,powder coating equipment,powder coating control unit

 

Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Contact Person
QR-CODE
from theInquiry
Please send your message to us
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.